iATKOS 5i 10.5.5 Intel DVD

[Pere]

Check what happends with -v, also try to don´t install graphic driver now, later we can try different drivers till find the best for you.

[wisemoses]

Check what happends with -v, also try to don´t install graphic driver now, later we can try different drivers till find the best for you.

Thank you Pere, i'll try when i get off work and i'll post the out come, thank you for your time. Would the wrong Graphics driver give a ACPI Driver Error?

Jordan

[precies]

Be carefull.... it´s not for upgrade a system, and you will have to play a little with the users acoounts to make it update your systems, i recommend you to use the "transfer information" application under utilities folder, so it saves your files and folders (but not all the syste,) and later return it to your new clean system.

The only two new options are the netkas boot (that will install dsdt method in your machine) and it´s covered on the DSDT thread, and the selection of decrypter, but both of them should work on all systems.

It´s really easy to install Iatkos V5.
If you have any explicit question, post it here.

There is no application called transfer information, the only one i can find is Migration Assistant. When I try to use that one, i have three options: from another mac, from time machine backup or other disk and to another mac. I can't use any of these because i have to make a backup. Do I need to use Time Machine for making a backup?

[Pere]

Ups, sorry, about this misinformation, this error can be cause a wrong cpu setting on bios, a problem with a choosed kernel or the acpi driver selected.

Check this on your bios cpu options:
Should be like this:

Disable bit: ENABLED
virtualization: DISABLED
Hyperthreading: DISABLED
On the power options:
HPET: ENABLED (if avaliable).
ACPI 2.0: ENABLED

[beta992]

Hi,

I'm new to iATKOS, (I'm now using Ideneb)
So I was curious, and have been tested this version.

The installation goes great (without any error(s) and fast), selected everything that was needed for my motherboard/CPU/GPU, but when it's reboots on the end off the installation, it's keeps hanging. (black (half) overlay; no message as: Your computer needs to reboot..)

Tried safe boot, needed bios settings where set before installation, also tried disabling network/audio/serial..

It's keeps hanging with a CPU error (also tried without Speedtstep), but I think it has something to do with the motherboard.

Ideneb works without any error, but I want to use iATKOS; it's looks faster

Can it be solved? Tips? Know problem?

Thanks!

Specs:
Gigabyte GA-EP35-DS3R (rev. 2.1) - Know there are some problems, but how to solve?
Intel Core Duo 2 Q6600 (2,4 Ghz, no overclock what so ever)
2 GB Kingston Memory (CL6, 800 Mhz)
Nvidia Geforce 9600 GT (512MB, XFX)

[wisemoses]

Ups, sorry, about this misinformation, this error can be cause a worng cpu setting on bios, a problem with a choosed kernel or the acpi driver selected.

Check this on your bios cpu options:
Should be like this:

Disable bit: ENABLED
virtualization: DISABLED
Hyperthreading: DISABLED
On the power options:
HPET: ENABLED (if avaliable).
ACPI 2.0: ENABLED

No worries, i appreciate your help. Is Disable bit the same thing as Execute Disable Function(which is currently disabled in the bios)? I have ACPI 2.0 enabled, the other three options, Visualization, Hyperthreading and HPET i don't have as options.

Jordan

[cheehol]

rapidshare pls.

[beta992]

Ups, sorry, about this misinformation, this error can be cause a worng cpu setting on bios, a problem with a choosed kernel or the acpi driver selected.

Check this on your bios cpu options:
Should be like this:

Disable bit: ENABLED
virtualization: DISABLED
Hyperthreading: DISABLED
On the power options:
HPET: ENABLED (if avaliable).
ACPI 2.0: ENABLED

No worries, i appreciate your help. Is Disable bit the same thing as Execute Disable Function(which is currently disabled in the bios)? I have ACPI 2.0 enabled, the other three options, Visualization, Hyperthreading and HPET i don't have as options.

Jordan

I had to disabled ACHI and set (all) to IDE.

Installation works, but without ACHI.

[Pere]

Hi,

I'm new to iATKOS, (I'm now using Ideneb)
So I was curious, and have been tested this version.

The installation goes great (without any error(s) and fast), selected everything that was needed for my motherboard/CPU/GPU, but when it's reboots on the end off the installation, it's keeps hanging. (black (half) overlay; no message as: Your computer needs to reboot..)

Tried safe boot, needed bios settings where set before installation, also tried disabling network/audio/serial..

It's keeps hanging with a CPU error (also tried without Speedtstep), but I think it has something to do with the motherboard.

Ideneb works without any error, but I want to use iATKOS; it's looks faster

Can it be solved? Tips? Know problem?

Thanks!

Specs:
Gigabyte GA-EP35-DS3R (rev. 2.1) - Know there are some problems, but how to solve?
Intel Core Duo 2 Q6600 (2,4 Ghz, no overclock what so ever)
2 GB Kingston Memory (CL6, 800 Mhz)
Nvidia Geforce 9600 GT (512MB, XFX)

Boot with -v and post a picture of the problem, also try this settings on cpu options on bios:

Disable bit: ENABLED
virtualization: DISABLED
Hyperthreading: DISABLED
On the power options:
HPET: ENABLED (if avaliable).
ACPI 2.0: ENABLED

[Pere]

Ups, sorry, about this misinformation, this error can be cause a worng cpu setting on bios, a problem with a choosed kernel or the acpi driver selected.

Check this on your bios cpu options:
Should be like this:

Disable bit: ENABLED
virtualization: DISABLED
Hyperthreading: DISABLED
On the power options:
HPET: ENABLED (if avaliable).
ACPI 2.0: ENABLED

No worries, i appreciate your help. Is Disable bit the same thing as Execute Disable Function(which is currently disabled in the bios)? I have ACPI 2.0 enabled, the other three options, Visualization, Hyperthreading and HPET i don't have as options.

Jordan

Try different acpi drivers from dvd, did you try this already? also try different kernels...

[Pere]

Please, i need help to install 10.5.5.
I select:

main system
apple decrypt
x86 acpi
ohr
nvidia laptop
intel sata
ntfs-3g
realtek r1000
realtek 8139
intel pro broadcom 440x

I only got the apple sceen with a signal of forbidden, can someone help me please.

Thank you.

Try different Sata drivers from the dvd till you find the one for your motherboard.
If you keep getting this symbol, we can check other solutions.

[rramon]

pere,

just one question:
if i ´don´t select a custom kernel (i.e. voodoo) then the default vanilla kernel will be installed, right?

[Pere]

pere,

just one question:
if i ´don´t select a custom kernel (i.e. voodoo) then the default vanilla kernel will be installed, right?

Yep.

[rramon]

thanks!
can´t wait until sth goes wrong and kills my current iatkos 4i
again, great release!

[howoarang]

Working perfect!!!

MB: Asus P5Q with modified BIOS 1306
RAM: 2x1GB DDR2 PC8500 1066MHz
CPU: Intel Core 2 Quad Q6600
VGA: 8800GTS 320MB PCI-E (using NVinstaller v.52.pkg), now 1280x1024@60Hz, all suppored
Sound: onboard Realtek ALC1200 (driver for P5Q)
HDD: WD 320GB SATA-II 3gb/s in AHCI mode (ICH10R)